Cypress Semiconductor Corp
ADG467BRSZ-REEL | Analog Devices | - | 20-SSOP (0.209", 5.30mm Width) | withstand overvoltage inputs from −40 V to +40 V. The ADG467 can operate off both bipolar and unipolar supplies. The channels are normally on when power is | 11.46 | |||
ADG467BRZ-REEL7 | Analog Devices | - | 18-SOIC | withstand overvoltage inputs from −40 V to +40 V. The ADG467 can operate off both bipolar and unipolar supplies. The channels are normally on when power is | 12.72 | |||
5962-9063301MCA | Analog Devices | - | 14-CERDIP | stable operation at unity gain. The AD713J is rated over the commercial temperature range of 0°C to 70°C. The AD713A is rated over the industrial temperature of -40°C to +85°C. | 166.38 | |||
5962-9313001MPA | Analog Devices | - | 8-CDIP (0.300", 7.62mm) | The AD830 is a wideband, differencing amplifier designed for use at video frequencies but also useful in many other applications. It accurately | 93.18 | |||
5962-9313201MPA | Analog Devices | - | 8-CERDIP | 0.04° (NTSC) make the AD810 ideal for any broadcast quality video system. All these specifications are under load conditions of 150 Ω (one 75 Ω back | 70.4631 | |||
5962-9151901MPA | Analog Devices | - | 20-CLCC | providing superior speed with excellent dc performance. Ultrahigh open-loop gain (1 kV/mV minimum), low offset voltage, and superb gain linearity makes the | 564.925 | |||
AD8004ARZ-14-REEL7 | Analog Devices | - | 14-SOIC | applications where dual power supplies of up to feed ±6 V and single supplies from 4 V to 12 V are needed. The AD8004 is available in the industrial temperature range of –40°C to +85°C in a 14 lead SOIC package. | 15.7245 | |||
AD8044ARZ-14-REEL7 | Analog Devices | - | 14-SOIC (0.154", 3.90mm Width) | capability with an input voltage range extending 200 mV below the negative rail and within 1 V of the positive rail. The output voltage swing extends | 15.3 | |||
HMC1044LP3E | Analog Devices | - | 16-QFN (3x3) | . The HMC1044LP3E filters out LO harmonics and ensures little or no LO contribution to modulator sideband rejection or demodulator image rejection | 6.6 | |||
5962-8777101MCA | Analog Devices | - | 14-CDIP (0.300", 7.62mm) | OP400 is a low 11 nV/√Hz at 10 Hz, half that of most competitive devices. The OP400 is an ideal choice for applications requiring multiple precision operational amplifiers and where low power consumption is critical. | 108 | |||
5962-9452101M2A | Analog Devices | - | 20-CLCC | currents at all temperatures. This is in contrast to FET input op amps whose bias currents start in the picoamp range at 25°C but double for every 10 | 355.825 | |||
5962-8777101M3A | Analog Devices | - | 20-CLCC | OP400 is a low 11 nV/vHz at 10 Hz, half that of most competitive devices. The OP400 is an ideal choice for applications requiring multiple precision | 360 | |||
5962-9457201MEA | Analog Devices | - | 16-SOIC (0.154", 3.90mm Width) | independent of the gain. The SNR for a 1 V rms output and a 1 MHz noise bandwidth is typically 76 dB for the AD600 and 86 dB for the AD602. The amplitude | 279.78 | |||
5962-9559701MPA | Analog Devices | - | - | AD8036 and AD8037 exhibit an exceptionally fast and accurate pulse response (16 ns to 0.01%), extremely wide small-signal and large-signal bandwidths and | 123.36 | |||
5962-9095502M2A | Analog Devices | - | - | of ~23 µV rms (–80 dBm) at a bandwidth of 100 MHz. The dynamic range using cascaded AD640s can be extended to 95 dB by the inclusion of a simple filte | 1457.64 | |||
5962-9151901M2A | Analog Devices | - | 20-CLCC | providing superior speed with excellent dc performance. Ultrahigh open-loop gain (1 kV/mV minimum), low offset voltage, and superb gain linearity makes the | 584.495 | |||
5962-9312901MPA | Analog Devices | - | 8-CERDIP | nV/vHz); however, the current noise of the AD829 (1.5 pA/vHz) is less than 10% of the noise of transimpedance amplifiers. The inputs of the AD829 are symmetrical. | 118.86 | |||
5962-9459301MPA | Analog Devices | - | - | ideal for buffer high speed A-to-D converters. The AD8001 offers low power of 5.5 mA max (VS = ±5 V) and can run on a single +12 V power supply, while | 124.295 | |||
ADCMP370AKSZ-REEL7 | Analog Devices | - | 5-TSSOP, SC-70-5, SOT-353 | Comparator Single R-R I/P 5.5V 5-Pin SC-70 T/R / IC COMPARATOR OPEN-DRAIN SC70-5 | 0.8982 | |||
ADCMP356YKSZ-REEL7 | Analog Devices | - | SC-82A, SOT-343 | Comparator & Reference Ckt, Sc70-4; Comparator Type:general Purpose; No. Of Comparators:1 Comparator; Response Time:-; Supply Voltage Range:2.25V To | 1.0245 | |||
ADA4897-1SRJZ-EPR7 | Analog Devices | - | SOT-23-6 | andwidth, 120 V/µs slew rate, and settle to 0.1% in 45 ns. With a wide supply voltage range (3 V to 10 V), the ADA4896-2/ADA4897-1 are ideal candidates | 13.1825 | |||
ADA4930-1SCPZ-EPR7 | Analog Devices | - | 16-LFCSP-VQ (3x3) | processing applications. The ADA4930-1 is available in a Pb-free, 3 mm × 3 mm 16-lead LFCSP, and the ADA4930-2 is available in a Pb-free, 4 mm × 4 mm | 27.875 | |||
ADCMP343YRJZ-REEL7 | Analog Devices | - | SOT-23-8 | eference. The other input is available externally, via an internal mux, through pins ±INA_U or ±INA_L. The state of the output determines which of | 3.379 | |||
ADCMP601BKSZ-REEL7 | Analog Devices | - | 6-TSSOP, SC-88, SOT-363 | designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input | 6.505 | |||
ADCMP354YKSZ-REEL7 | Analog Devices | - | SC-82A, SOT-343 | and output structures will allow voltages of up to 22 V on the input of all devices and the output of the open-drain devices. High performance over the | 0.96 |